BIS CERTIFIED • PESO APPROVED • TÜV SÜD AUDITED

Institutional Credentials, Regulatory Approvals & Industry Awards

BTP Structural India Private Limited (BTPS) is recognized by the Bureau of Indian Standards, PESO/CCOE, and TÜV SÜD for maintaining an unblemished zero product failure record across our 2,00,000 unit annual manufacturing plant in Belagavi, Karnataka.

BTPS Enterprise Trust Chain, Statutory Compliance, and Institutional Quality Accreditations
🛡️
Zero Defect Verification
100% Volumetric Hydro-Test Guarantee
RECOGNITION OF EXCELLENCE

National Engineering Awards

BTPS’s institutional credentials reflect four decades of strict adherence to Indian Standards and zero-defect quality control across all pressure vessel lines.

MINISTRY OF CONSUMER AFFAIRS
Bureau of Indian Standards Official Certification Seal

BIS World Standards Day 2025 Award of Excellence

Conferred by the Bureau of Indian Standards (Hubli Branch Office, Ministry of Consumer Affairs) on World Standards Day 2025 for achieving zero product failures across two consecutive years of continuous high-volume cylinder supply.

0 FAILURES • 2 CONSECUTIVE YEARS
LONG-TERM ACCREDITATION
Bureau of Indian Standards Official Certification Seal

25+ Years Continuous BIS Partnership Milestone

For over two and a half decades, BTP Structural India Private Limited (BTPS) has maintained an unbroken legacy of engineering precision, serving as a trusted benchmark for pressure vessel manufacturing across India. Our journey is defined by an uncompromising commitment to the stringent directives of the Bureau of Indian Standards (BIS) and the Petroleum and Explosives Safety Organization (PESO).

25+ Years
Unbroken Statutory Verification
GLOBAL ACCREDITATION Certificate #99 100 23469
TÜV SÜD ISO 9001:2015 Full High-Resolution Official Quality Management System Audit Certificate 🔍 Click to Expand & Read Full Certificate
INTERNATIONAL QUALITY BENCHMARK

TÜV SÜD ISO 9001:2015 Certified Quality Management System

BTP Structural India Private Limited operates under a rigorously audited Quality Management System certified by TÜV SÜD South Asia Private Limited (Certificate Registration No. 99 100 23469). This international accreditation validates that our integrated manufacturing plant in Belagavi, Karnataka maintains absolute process repeatability across every stage of pressure vessel production.

The scope of our TÜV SÜD certification encompasses the complete lifecycle engineering of welded and seamless steel pressure containers: from raw material spectrographic analysis and automated Submerged Arc Welding (SAW) to 900°C furnace normalizing, porous mass synthesis, and 100% volumetric hydrostatic expansion testing.

For national energy PSUs, HVAC OEMs, and global gas distributors, our ISO 9001:2015 framework serves as formal third-party assurance that every consignment dispatched from BTPS strictly conforms to international safety and structural specifications.

Cert #99 100 23469
Global Registration
100% Process Repeatability
Audited Quality Assurance
STATUTORY CLEARANCES

Statutory Accreditation & Approvals

Every manufactured cylinder batch receives independent statutory verification from PESO inspecting officers and international quality auditors.

CCOE COMPLIANT PESO / GOVT OF INDIA
Petroleum and Explosives Safety Organization Approval Seal

PESO / CCOE Approvals

High-Pressure Vessel Certification

Rigorous design and welding approvals validated for 250 kgf/cm² test pressure, ensuring maximum safety for industrial gas storage and transport.

BIS MANDATORY STANDARDS GOVT OF INDIA
Bureau of Indian Standards Approval Seal

Bureau of Indian Standards (BIS)

IS 7312 & IS 3196 Active Licenses

Unbroken statutory licenses covering Dissolved Acetylene and High-Test Refrigerant Gas cylinders manufactured under strict IS 6240 raw steel specifications.

TECHNICAL SPECIFICATIONS

Mandatory Product Certification Standards

BTPS containment vessels are built to exact Bureau of Indian Standards (BIS) specifications, incorporating JSW prime steel and standardized IS 3224 safety valves.

BIS STANDARD
BIS Certification Seal

IS 7312 Certification Standard

Dissolved Acetylene (DA) Gas Cylinders

Governs 17.2 Ltr and 41.0 Ltr three-piece welded and seamless shells integrated with Monolithic Calcium Silicate Porous Mass (90–92% porosity, 22 kgf/cm² crushing strength) and Acetone solvent.

BIS STANDARD
BIS Certification Seal

IS 3196 (Part 2) Certification Standard

Refrigerant Gas (RG) Cylinders — Standard & HT

Governs welded refrigerant containers ranging from 5.6 Ltr to 68.0 Ltr. High Test (HT) variants utilize IS 15914 steel rated for 70 kgf/cm² hydrostatic test pressure and 46.67 kgf/cm² working pressure.

RAW MATERIAL

IS 6240 / IS 15914 Material Standards

JSW Prime Steel Procurement

Raw material security guaranteed through direct sourcing of prime steel coils exclusively from JSW Steel, delivering consistent chemical composition, deep drawing capability, and structural weld integrity.

SAFETY FITTINGS

IS 3224 Valve Conformance

Standardized Safety Fittings

Integrated with IS 3224 compliant valves, protective valve guards, and dual 100°C fusible safety plugs on welded DA variants to prevent thermal over-pressurization.

ZERO-DEFECT PROTOCOLS

Institutional Quality Control Protocols

In accordance with our zero-defect quality discipline, every unit manufactured at our Belagavi facility undergoes comprehensive, 100% non-sample testing prior to statutory release.

💧

100% Hydraulic Expansion & Stretch Testing

Every cylinder shell is subjected to full hydraulic test pressure (up to 53 kgf/cm² for welded DA, 70 kgf/cm² for HT RG, and 250 kgf/cm² for seamless DA) to verify volumetric expansion limits and permanent strain resistance.

💨

100% Pneumatic Leakage Testing

100% pneumatic leak verification under high pressure (40 kgf/cm² for welded DA, 150 kgf/cm² for seamless DA, and 12 kgf/cm² for RG) ensures zero micro-fissure or seam permeability prior to solvent or valve installation.

⚙️

In-House Specialized Manufacturing

Complete process control from JSW coil shearing to Deep Drawing, Submerged Arc Welding (SAW), precision Normalizing & Stress Relieving furnaces, and proprietary porous mass formulation.

COMPLIANCE FAQ

Institutional Accreditation & Quality Guidelines

Factual information regarding award criteria, statutory procurement validation, and test certificates.

What specific criteria earned BTPS the BIS World Standards Day 2025 Award of Excellence?

+

BTPS was awarded the BIS Award of Excellence by the Hubli Branch Office (Ministry of Consumer Affairs) for maintaining an unblemished zero product failure record and 100% field compliance across two consecutive years of high-volume industrial gas cylinder production.

How do institutional credentials validate BTPS cylinder quality for enterprise buyers?

+

Our institutional credentials—including TÜV SÜD ISO 9001:2015 certification (Cert #99 100 23469), active BIS manufacturing licenses (IS 7312 and IS 3196 Part 2), and PESO safety clearances—ensure every cylinder meets strict statutory safety parameters before leaving our Belagavi plant.

Are institutional test certificates and inspection reports provided with batch orders?

+

Yes, every batch order dispatched from our Belagavi plant includes formal manufacturer test certificates, PESO inspection logs, 100% hydraulic stretch test reports, and 100% pneumatic leak test documentation.

What raw materials and welding standards back BTPS accreditation claims?

+

BTPS procures prime steel exclusively from JSW Steel under IS 6240 and IS 15914 specifications. All circumferential seams undergo automatic Submerged Arc Welding (SAW) followed by full thermal stress relieving to guarantee weld integrity under extreme working pressures.

Planning Batch Orders or Custom Specifications?

Partner with an award-winning industrial gas cylinder manufacturer. Connect with our Belagavi technical team for statutory compliance documentation, certified test logs, or scheduled supply contracts.